Excavators


Wacker Neuson 803 – 1 tonne Excavator
Buckets: 300, 700 mud, ripper
The 803 is the smallest Wacker Neuson excavator – but what it lacks in size, it makes up in strength. Its compact size, at just 700 mm wide, makes it ideal for demolition and renovation work within buildings. The rubber tracks do not damage floors and it can easily drive through internal doors. Hydraulic functionality has been given particular attention. The standard auxiliary hydraulics permits the operation of various hydraulic attachments, such as the hydraulic hammer.
Yanmar Vio17 – 1.7 tonne Excavator
Buckets: 300, 450, 900 mud, ripper
The Yanmar ViO17 Mini Excavator is a compact excavator with zero tail swing that is most suited for navigating tight spaces. This mini excavator weighs 3,836 pounds and has a variable undercarriage. The Yanmar ViO17 has a three-cycle, water-cooled Interim Tier 4 diesel engine that puts out 13.5 horsepower. The engine gives the compact excavator a maximum lifting capacity and bucket digging force that rivals those of excavators twice its size. The engine not only powers the boom and arm but also drives the excavator to a top speed of 2.7 mph.
Yanmar Vio25 – 3 tonne Excavator
Buckets: 300, 450, 1200 tilt mud, ripper
Goes places bigger excavators can only dream about. If you work on tight residential or inner city jobsites, you need an excavator that fits through narrow openings and works comfortably in tight quarters. Meet the new ViO25-6A. This scrappy, go-almost-anywhere true zero tail swing excavator works anywhere you can fit the tracks. It also comes with a fuel-efficient 20.4-hp Tier 4 Final engine that delivers unexpected power for its size, with less environmental impact. We apologise if it gives those bigger excavators nightmares.

Yanmar Vio35 – 4 tonne Excavator
Buckets: 300, 450, 1200 mud, ripper
Yanmar ViO35-6 zero tail swing excavator uses 20 percent less fuel than its predecessor and has the same digging and lifting power. Powered by a Yanmar 3TNV88 diesel that delivers 24.4 horsepower, the machine has standard ECO and Auto-deceleration modes. A digital Smart Assist control system stores up to three months of operational and maintenance support information that can be monitored in one centralised location.
Yanmar Vio45 – 5 tonne Excavator
Buckets: 300, 450, 1200 mud, ripper
The Vio45 is an exceptionally designed 4.5t excavator, operators will be impressed with its superior performance and fuel efficiency, making the Vio45 the ideal choice when hiring.
Yanmar Vio55 – 6 tonne Excavator
Buckets: 300, 450, 1200 mud, ripper
The Vio55 is an exceptionally designed 6t excavator, operators will be impressed with its superior performance and fuel efficiency, making the Vio55 the ideal choice when hiring.
Yanmar Vio80 – 8 tonne Excavator
Buckets: 450, 600, 1200 mud, ripper
The VIO80 is a step ahead in every way, including ease of operation and maintenance, durability and the performance you’re been asking for. The Vio80 includes the original True Zero Tail Swing offered by all Yanmar Vio’s, making it the ideal choice when choosing an excavator to hire. A powerful air conditioner keeps the cabin cool, matched with spacious cabin and well placed controls and switches.
Doosan DX140LCR – 14 tonne Excavator
Buckets: 600, 900, 1500 tilt mud and ripper
The DX140LCR delivers excellent durability and trusted reliability. The popular DX140LCR is a reduced radius 14 tonne excavator and are very popular for roadworks and sites where there’s just not much room.
Attachments

Hydraulic Breaker
For 1 & 1.7 tonne Excavators
For 3, 4, 5 & 6 tonne Excavators
For 8 tonne Excavators
For 14 tonne Excavators

Auger + 1 Drill
For 1 & 1.7 tonne Excavators
For 3, 4, 5 & 6 tonne Excavators
For 8 tonne Excavators
For 14 tonne Excavators
Additional Drills

Hydraulic Rock Grab

Tilt Bucket
For 8 tonne & 14 tonne only.
Skid Steer & Track Loaders



Skid Steer Loaders
Toro 323 – 711kg Dingo
Buckets: 1050mm 4:1
The Toro wheeled W323 petrol compact utility loaders are built to deliver a high power-to-weight ratio in the compact utility loader category. At only 104 cm wide and zero-turn capability, these compact utility loaders can access confined spaces and their short length contributes to efficient trailering. The removable counterweight allows for added lift capacity or increased down pressure for optimal attachment performance. With 4 Paw independent 4-wheel drive traction system, it’s sure on its feet in any environment, wet or dry. The Toro’s wheeled compact utility loaders are without doubt built for Australia’s tough conditions.
Bobcat S185 – 2800kg Loader
Buckets: 1550mm 4:1
The compact and powerful Bobcat S185 Skid Steer Loader manoeuvres confined areas and tight spots with ease. The Bobcat S185 skid steer loader is 68 inches wide, length is 130.3″ and has a height of 76.3″. The Bobcat S185’s turbocharged diesel engine delivers 61 HP. The Bobcat S185 has a rated lift capacity of up to 839kg. The Bobcat S185 superior visibility gives you a clear view of the bucket and the tire edges. (Helpful in close quarters). The sculptured high back seat will help you keep productivity high.
Track Loaders
Terex PT30 – Open Cab 1600kg Loader
Buckets: 1180mm 4:1
The Terex® PT-30 is the most compact rubber track loader in the Terex range. It’s sized to work in confined spaces, yet is productive enough to replace an entire crew of hand labour. The PT-30 is also low-impact so it can work on finished lawns and landscaping without leaving damage. A wide range of performance-matched attachments make it ideal for many jobs.
Bobcat T450
Buckets: 1750mm 4:1
You can manoeuvre the growing star Bobcat T450 Compact Track Loader around tight worksites with a powerful performance that will exceed your expectations for such a compact machine. The radius lift path of this impressive performer excels at jobs with mid-range working heights such as dumping over walls, backfilling or unloading flatbed trucks.
Bobcat T590 – Air Cab 3940kg Loader
Buckets: 1750mm 4:1
With the highest lifting height in the 500 platform, the Bobcat® T590 compact track loader is ideal for loading and unloading tasks. The Tier 4, vertical lift T590 is ideal for tasks where space is limited but the need for maximum lift height is necessary.
Attachments

Spreader Bar

Pallet Forks

Road Broom
Compaction


Rollers
Wacker Neuson RTX-SC3 Trench Roller
THE SMART REMOTE-CONTROLLED TRENCH ROLLER
The RT trench roller with the SC3 infrared-remote control offers proven compaction results with safer operation. The smart control uses an infrared signal with line-of-sight control. The machine stops moving and vibrating should the line-of-sight be lost or if the operator comes within one meter (three feet) of the roller’s receiving eyes with the control box. The articulated trench roller offers below the axle exciter in each drum to allow for the efficient transfer of compaction energy to the soil for superior compaction results.
DYNAPAC CC800 – 1.8 tonne Roller
DOUBLE DRUM VIBRATORY ROLLERS
At only 1.8 tonne, this smooth double drum roller is ideal for those tight spaces. It can also be picked up on a trailer and towed behind most cars.
DYNAPAC CC1250 – 3 tonne Roller
DOUBLE DRUM VIBRATORY ROLLERS
The Dynapac CC1250 is a popular 3 tonne double drum roller suitable for most road applications, parking lots and driveways.
DYNAPAC CA1300PD W. BLADE – 5.5 tonne Roller
SINGLE DRUM VIBRATORY ROLLERS
The Dynapac CA1300PD with blade is a vibratory roller designed for compaction operations in pipe trenches, on road shoulders and in cramped spaces in connection with refilling work. The roller is also suitable for repair work on dams, power stations, parking lots and airfields. The configuration of the machine includes pads, drum drive and strike-off blade. This machine is especially suitable for the compaction of silt and clayey soils.
Tippers


Tipper – Automatic – Car Licence
Mitsubishi Fuso – 2 tonne Tipper
Automatic, Drive on car licence.
Mitsubishi Fuso – 2 tonne Tipper +
Wacker Neuson 803 – 1 Tonne Excavator
Mitsubishi Fuso – 2 tonne Tipper +
Yanmar Vio17 – 1.7 tonne Excavator
Mitsubishi Fuso – 2 tonne Tipper +
Terex PT30 – Open Cab 1600kg Loader
Mitsubishi Fuso – 2 tonne Tipper +
Toro 323 – 711kg Dingo
Mitsubishi Fuso – 2 tonne Tipper +
1.8T Double Drum
8 tonne Tipper – 6m³
Single axle Tipper
WHY CHOOSE IMPACT PLANT HIRE?

With over 13 years of experience helping shape Queensland the Sunshine State into what it is today.
We are constantly expanding and adapting our plant fleet to the needs of our customers.
We take great pride in our fleet, our employees and our track record of reliability and affordability.
COMPETITIVE PRICE – 10% PRICE BEAT GUARANTEE!
BEST SERVICE
13 YEARS EXPERIENCE
LATEST EQUIPMENT
FULL RANGE OF ATTACHMENTS
